Ferno the Wood Fired Oven

At The Beginning There Was A Maple Tree and then... the birth of Ferno the Forno (Oven)

Oven built in 2016 (Summer)
After dreaming so long of building a wood fired oven, an old maple tree sitting on the side of the ravine next to a stream fell during a windstorm. No one was hurt but a large Nanking cherry shrub was crunched. Naturally when a tree falls, it can be a sign from mother nature that a space is created for something else - the wood fired oven foundation!
After cleaning up what was left of the old shrub, I discussed the idea with a friend of mine that a nice pizza oven could be built where the cherry bush was planted. He (David) is a master carpenter and pizza lover.  Without hesitation he took up the offer to help me out in this project.

Shelter and the Main Structure 

Based on where you live and how well you are planning to preserve your oven, building a shelter around it is a very good idea.
This is where the idea came from link. A sincere thank you to who took that picture and designed it!

The main frame was set up with pressure treated lumber 6 x 6 posts and cement as well as the rest of the structure.

Once the main frame was completed and the floor support was set, we used a mix of fire clay and sand (1 part each) and mixed it with water.  See here for more details.

Fire bricks were placed on top in a very simple parallel pattern (of course a “spina di pesce” or “herringbone” pattern would have been fancier but also more time consuming, and it would have required more bricks.)

The Dome – Bricks & Mortar

After checking out a bunch of websites I decided to try building a corrugated cardboard pattern and set it up as the support structure for building the dome. Would I do it again? Maybe.  Would I try some other method? Yes.

Once the cardboard structure was set, centered, and aligned, a heavy aluminum foil was wrapped around it to prevent the cardboard from getting wet.  This also provided further reinforcement.  This is how the construction of the dome began! 
The mortar (refractory cement) used was faithfully made based on the following mix. 

The image below gives you an idea of the process. I was generous with the mortar as I was stacking the bricks. The extra mortar functioned like plaster.
A word about the bricks used for the dome: I decided to go with red bricks. I did plenty of online searches and came to the conclusion that well aged (old) red bricks could work well.
Using Craigslist I was able to find someone who recently demolished a 100 year old brick house. The bricks were in very good condition considering the age. I bought about 200 considering that I was going to cut them in half.

Ferno's Mouth

The photo below gives you an idea of the work completed and the initial start of creating the oven's mouth or opening.

The Arch

It is worth to share a few words (and images) about integrating the opening / arch into the dome.  The main issue (at least for us) was the actual portion of the dome getting connected to the arch and how to support the layer of bricks next to it because there is no support underneath.

We decided to use a small aluminum metal support to hold the bricks. Bricks had to be cut to set properly in the space between the arch and the front of the dome. I was hoping to come up with some other solution to hold it all together but I could not.  The not so good idea was to use aluminum in spite of the idea that it could hold well high temperatures. Unfortunately as the heat will increase in your oven the metal bar will start bending and twisting. Much better ti use iron (note for future project and save in the “live and learn” category.)

The Top

As you are getting close to complete the first phase of your oven, piling / stacking brick after brick, the top is next to be done. Each brick gets closer to each other and adjustments have to be done to accommodate the final steps.

Insulation

This is super important. The better the oven is insulated the more efficient it will be in cooking and maintaining longer and constant temperature.
I followed the instructions from here using first some heavy aluminum foil wrapping the dome and then the first insulation layer of vermiculite - cement and lime.
I went for a solid 4 inches (10 centimeters) and if you want to have the layer thicker – I would add another couple of inches (5 centimeters).

Cladding

This is a great definition found here:
The final layer of the oven is called cladding which may either be made of concrete or bricks. Some prefer the aesthetics of a brick layout and utilize fire bricks for the internal dome. It may be finished off with a final cladding layer of regular building bricks over the top of the insulation. Not only is this less costly, but it also increases the amount of time that the oven stays consistently hot. Cladding provides the following advantages to your oven:

• It serves as an additional layer of insulation and adds to the thermal capacity.
• It can cook items utilizing lesser time, since cladding encloses heat for a longer periods.
• It slows down the drop in temperature of the oven.
• Aesthetically improves the appeal of the oven.

Living in the NW, we get a lot of rain, cladding is a must to protect the overall structure.

Curing the Oven

Time is your friend.  The oven needs to dry and it could take some time depending where you live and how the weather treats you. I let it dry for 2 weeks before starting the first fire.
Source of good information:

Follow these instructions for curing your pizza oven. Curing wood fired ovens is critical to your pizza oven’s performance.  Failure to follow these instructions can result in damage up to and including cracking the dome, severely impacting heat retention..., see link for more information.

The Name: Ferno

The name came after the oven was well fired up and I got a feeling about it. It holds high temperatures quite well, even though such high temps are not necessary for cooking purposes. Besides being Italian and recalling Dante's Inferno, the oven gets real hot and keeps the heat for a very long time. Don't worry about the Inferno, Ferno is your friend!